| Frequency ranges |
from 470 to 1075 Mhz, depends on the country (see Configurations) |
| Switchable channels |
2400 managed in 40 groups ofr 60 frequencies completely user customizable |
| Switching-window |
Up to 362 MHz, depending on band (see Configurations) |
| Frequencies |
Quartz PLL frequency synthesizer circuit (5 kHz step) |
| Frequency error |
±2.5 ppm, in the rated temperature range |
| RF Power |
switchable typ. 10mW/L10 W/ 20 mW/ L20 mW / 50 mW /100 mW
note: in some countries high power can be disabled, for local norm! |
| Antenna connector |
LEMO-F 1 pin |
| Modulation |
wideband/narrowband FM, with digital audio conditioning (FPGA) |
| Nominal deviation |
±40 kHz Wideband / ±25 kHz Narrowband |
| Peak deviation |
±56 kHz Wideband / ±35 kHz Narrowband |
| Spurious emissions |
< 2 nW |
| Telemetry feature |
TX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring
optional PTT (push to talk) operation |
| Noise Reduction system |
ENS - Wisycom Extended-Sound Optimized |
| AF bandwidth |
45 Hz ÷ 17 KHz (3dB) in NarrowBand mode (NB)
45 Hz ÷ 20 KHz (3dB) in WideBand mode (WB) |
| Distortion |
< 0.3 % (0.15 % typ.) |
| SND/D ratio (Analogue) |
typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband |
| Audio input connector |
LEMO 3pin |
| Audio input level |
from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps |
|
Max input level
|
+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level |
| Storage media |
micro SD memory card (.wav files - BWF) |
| Time code |
Linear time code decoding |
| Bit rate |
16 bit / 24 bit / 32 bit |
| Sampling rate |
48 kHz |
| Managing interface |
Bluetooth 5 long range, USB-C, IrDA |
| LED |
2 RGB LEDs (red, green and blue) for audio, RF and battery status.
1 LED for recording, 1 LED for battery charger |
| Battery lifetime indication |
percentage or minute/second |
| PTT function |
Pin 3 of the AF connector can be setup to an external push button |
| Display |
High contrast OLED white display (128 x 64 pixels) |
| Power supply |
2 x AA battery (Alkaline, NiMh or Lithium), MPRLBP lithium (5.55 Wh) |
| Power consumption |
250mA@ 2.6V average (display off, 100mW power) |
| Battery life |
approx. 10 hours @ 10mW with Alkaline batteries |
| Temperature range |
-10 ÷ +55 °C |
| Dimensions |
75,7mm x 61,4mm x 19,4mm (HxWxD) without clip |
| Weight |
Approx. 140 g. without batteries (183 g. with lithium batt.) |
