The Wisycom MPR52-ENG Wireless Receiver is a compact two channels receiver designed for professional ENG applications. The new MPR52-ENG has two built-in diversity receivers with both analogue and digital outputs. With up to 790 MHz bandwidth in the 470/1260 MHz range, the MPR52 features next generation multiband front-end filtering.
The software selectable wideband and narrowband DSP-FM operation gives users options based on their project needs. Country specific Surface Acoustic Wave (SAW) filters are also available (USA: 935-960 MHz and Japan: 1240-1260 MHz).
The receiver also offers convenient function buttons, including a dedicated frequency scan option. Battery management is flexible as it features standard battery packs that can be charged with the dedicated charger or through the micro-usb-B connector.
Wisycom MPR52-ENG Features
- Two channels diversity receiver
- DSP Analogue & Digital Audio Output (AES3)
- Up to 790 MHz bandwidth in 470/1260 MHz range
- Next Gen Multiband front-end filtering:
- High Q moving filter in 470-960 MHz
- High Q moving filter in 960-1160 MHz (DME)
- Country specific saw filters: USA 940-960 MHz & Japan 1240-1260 MHz or 806-810 MHz
- Wideband and Narrowband DSP-FM operation (SW selectable):
- Narrowband allows more 50% band efficiency
- Narrowband allows about 3dB extra sensitivity and noise immunity
- Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
- High contrast OLED display
- Automatic scan & transmitter programming through infrared
- DSP based for extreme flexibility and multicompanding operations
- Miniature design with integrated battery pack:
- MPRLBP (Cameron Sino reference No: CS-WMR500SL)
- 2 x AA batteries
- Operation and charger (lithium) thru USB connector
- Monitor & control through USB and Wisycom Manager 2.0 (computer SW):
- This transforms MPR52 into a quick and low noise portable spectrum scanner!
Wisycom MPR52-ENG Specifications:
Frequency ranges |
B11 band option: 470÷800 + 823÷832 + 961÷1000 + 1045÷1075MHZ(EU/UK) B12 band option: 470÷800 + 823÷832 + 920÷960 MHZ (EU/US/KR)
|
Switchable channels |
2400 managed in 40 groups ofr 60 frequencies completely user customizable |
Switching-window |
Up 790 MHz |
Frequencies |
microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step; frequencies is easily PC reprogrammed with USBmini interface or optional UPKmini programmer |
Frequency error |
< ± 2.5 ppm, within the rated temperature range |
Modulation |
FM mono, wideband or narrowband IFB (SW selectable) |
Peak deviation |
±54 kHz (wideband), ± 40 kHz (narrowband) |
Antenna input impedance |
50 ohm sma type (SWR < 1:2; typ. 1:1.4) |
Sensitivity |
2 μV ( 6 dBμV), for SND/N > 58 dB; 5 μV (14 dBμV), for SND/N > 98 dB in the whole switching-window ** |
Amplitude response |
< 0.5 dB (for RF input signal:6 dBμV ÷ 100 dBμV) |
Co-channel rejection |
> 80 dB typical (for channel spacing ≥ 400 kHz) |
Spurious emissions |
< 2 nW (typical = 0.1 pW) |
Noise Reduction system |
ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis + Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable |
AF bandwidth |
30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband) |
Frequency response |
± 1 dB in the 30 Hz ÷ 20 kHz range (wideband), ± 1 dB in the 30 Hz ÷ 15 kHz (narrowband) |
Distortion |
0.3 % typical |
SND/D ratio (Analogue) |
100 dB typical** |
SND/D ratio (AES3) |
> 125 dB typical |
Audio output |
Electronically balanced on 5 pin mini-XLR (M), analogue or digital (SW selectable), impedance ≤ 200 ohm |
Audio output level |
MAX +18 dBu (peak deviation), adjustable in one dB step in a range of 54 dB |
Digital output |
AES3 @ 48 kHz |
Monitor output |
Stereo Plug 3.5mm(TRS) Locking (M6 x 0.5 thread) |
Monitor output level |
2 X 100mW @ 32 Ohm |
Managing interface |
micro USB |
POWER LEDs |
3 colors dedicate LED |
Display |
OLED 128x64 (white) |
Front buttons |
Simple operation with 4 buttons to quickly monitor and setup the receiver. One touch function for a frequency scan and sync function. |
Powering |
2 x IEC-LR6 1.5V size-AA alkaline or NiMh rechargeable and MPRLBP lithium battery pack |
Battery life |
- approx. 7 hours with MPRLBP Lithium-ion battery pack MPRLBP type - approx. 3.5 hours with 2x AA Alkaline batteries Energizer - approx. 4.5 hours with 2x AA NiMH 2.5Ah |
Temperature range |
-10 ÷ + 50 °C |
Dimensions |
91mm x 71.5mm x 27mm (HxWxD) with clip |
Weight |
100 g approx. without batteries |
|
*RMS value, A-weighted, 22 Hz / 22 KHz |