Deliver pristine audio quality with the Zaxcom TRXCL5 wide-band camera link transmitter for sound professionals in film, television or ENG applications. The Zaxcom TRXCL5 transmits using 100% digital modulation and audio is fully encrypted to keep recordings private. It's constructed from an impact-resistant metal casing that's cool to the touch. A bright OLED display provides easy menu navigation.
The Zaxcom TRXCL5 sends audio with embedded timecode to camera via a UHF signal to any Zaxcom receiver like the QRX200, RX200, QRX235 or MRX/RX-4. It can also send audio and timecode via ZaxNet's 2.4 GHz signal to an ERX3TCD receiver, or remote control commands to any Zaxcom digital recording wireless transmitter.
A TA5 audio input offers balanced stereo line level or sample rate converting AES. The BNC connector provides timecode in. There's also a RS422 port for direct connection to the Zaxom GUI Bridge so you can easily setup URX50/100 and remote control your wireless via any device that can access the internet.
Audio can be simultaneously transmitted and internally recorded to a microSD card using MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to loss of power or early card removal.
Specifications
TRANSMITTER:
- RF modulation: Proprietary Digital Method
- TRXCL5 RF frequency range: 512-698 MHz
- RF frequency step: 100 KHz
- RF bandwidth in ZHD Mode: 50 KHz
- RF bandwidth: 200 KHz
- channel separation in XR Mode: 400 KHz
- antenna connector: 50 Ohm SMA Female
- emission designator: 180 KV2E
- FCC part: 74.861
TRANSMITTER AUDIO:
- dynamic range: 114 dB
- distortion: 0.002%
- frequency response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
- system group delay: 3.5 ms
- audio input connector TA5 male
- analog Input Range: -10 to +4 dBu
- analog input type balanced line level
- audio input Impedance: 4.7 k Ohm
- ADC bit-depth: 24 Bits
- ADC sampling-rate: 48 kHz
- AES input: balanced with sample rate conversion
- sample rate range: 32 Khz to 96 Khz
TIMECODE READER / GENERATOR:
- clock accuracy: 1.54 PPM (1 Frame Out in 6 Hours)
- timecode type: SMPTE
- timecode frame-rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
INTERNAL RECORDING:
- media: MicroSD Card (Flash Memory)
- file format: .ZAX
- recording time: 96 Hours (16 GB Card)
2.4 GHz ZAXNET TRANSMITTER:
- RF frequency range: 2.403 to 2.475 GHz
- RF modulation: Digital Spread Spectrum
- RF frequency step: 0.001 GHz (1 MHz)
- RF bandwidth: 1 MHz
- channel separation: 2 MHz
- sensitivity: -96 dBm
- RF power output: 100mW max
PHYSICAL / POWER:
- weight: 207 g
- dimensions (H x W x D in mm): 25.4 x 90 x 82
- display: Graphic OLED
- power output: 25 / 50 / 100 mW, software selectable
- power consumption: 2.13 watts