The Zaxcom RX200 is a 200 MHz wide-band, compact, battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 26, or 512 – 698 MHz, all while still filtering out unwanted RF.
Zaxcom RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It’s also capable of receiving and outputting the embedded SMPTE timecode on a BNC connector also on mic, line or consumer levels, so no matter what the camera is all bases are covered.
Specifications
Receiver
| Receiver RF Channels |
1 |
| Diversity Method |
Antenna switching |
| RF Modulation |
proprietary digital method |
| RF Frequency Range |
518 to 698 MHz |
| RF Frequency Step |
100 KHz |
| RF Signal Bandwidth |
100 KHz in ZHD 96, 200 KHz in XR, mono, and stereo modes |
| Channel Separation |
500 KHz |
| Sensitivity |
-114 dBm |
| Antenna Connector |
50-ohm SMA female X 2 |
Receiver Audio – Analog Output X 2
| Dynamic Range |
116 dB |
| Distortion |
0.002% |
| Frequency Range |
20Hz to 16kHz |
| DAC Bit-depth |
24 bits |
| Connector |
TA-5M |
| Audio Output |
Active analog balanced |
| Audio Output Level |
-35dBm (mic), -10dBm (consumer) or 0dBm (line) |
Receiver Audio – Digital Output
| Signal Format |
AES Balanced |
| AES dynamic range |
123dB |
| Frequency Range |
20Hz to 16kHz |
| AES3 balanced output |
32 KHz |
| Audio Output Connector |
TA-5M |
Timecode
| Timecode output connector |
BNC |
| Timecode output level |
.01VPP, .2VPP, .5VVP, .9VPP, 1.5VPP |
| Time code output rate |
23.98, 24, 25, 29.97 ND, 29.97 DF, 30 |
Power
| External Power |
6 to 18 VDC (140mA @ 12VDC) |
| Power Connector |
Switchcraft 760k |
| Internal Power |
4 AA Batteries |
| Li-Ion Battery Life |
Up to 12 hours |
| NiMH Battery Life |
Up to 8.5 hours |
| Alkaline Battery life |
Up to 7 hours |
