The Zaxcom QRX200 is a 200 MHz wide-band ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 26, or 512 – 698 MHz, all while still filtering out unwanted RF.
Zaxcom QRX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on 2 x TA5 connectors. The two serial loop USB connectors are for connecting to another QRX200 or a QRX235 to share the QIFB remote control feature.
The Zaxcom QRX200 has an automatic tracking front end filter, so you can receive on any frequency in any block from 20 through 26 (512-698MHz) with impressive range. Here’s how that works – the filter allows signals within the 35 MHz tunable window into the receiver while blocking the interfering high-level signals outside this window.
|Single Mode Receiver Type||True diversity single conversion digital demodulator
|Dual Mode Receiver Type||Antenna diversity single conversion digital demodulator|
|RF Modulation||proprietary digital method|
|RF Frequency Range||512 to 698 MHz|
|RF Frequency Step||100 KHz|
|RF Bandwidth||100 KHz in ZHD 96, 200 KHz in XR, mono, and stereo modes|
|Channel Separation||500 KHz|
|Antenna Connector||50-ohm SMA female|
Receiver Audio – Analog Output (x4)
|Dynamic Range||114 dB|
|DAC Bit-depth||24 bits|
|Audio Output Level||Line|
Receiver Audio - Digital Output (x4)
|Signal Format||AES Balanced
|Audio Output Connector||TA-5M|