The Zaxcom IFB300 is a ZaxNet™ transmitter that sends high-quality, fully encrypted IFB audio, timecode, and remote control commands to Zaxcom Digital Recording Wireless transmitters and ERX receivers. The signals are carried on a single RF channel ocer 2.4 GHz which can be used license-free in almost any country.
Weighing 7.3 oz, it’s constructed from an impact-resistant metal casing that’s cool to the touch. A bright OLED display provides easy menu navigation.
The TA5 audio input offers balanced stereo line level or sample rate converting AES. The BNC connector provides timecode in.
New on the Zaxcom IFB300 is an RS422 port for direct connection to the Zaxom GUI Bridge so you can easily setup URX50/100 and remote control your wireless via any device that can access the internet.
Specifications
IFB RF Transmitter
| RF Power Output |
75 mW |
| RF Modulation |
Digital Spread Spectrum |
| RF Frequency Range |
2.403 to 2.475 GHz |
| RF Frequency Step |
0.001 GHz (1 MHz) |
| RF Bandwidth |
1 MHz |
| Channel Separation |
2 MHz |
| Antenna Connector |
50-ohm SMA Female |
| Emission Designator |
180 KV2E |
| FCC Part |
CFR Title 47, Part 15 |
IFB Audio Transmitter
| Dynamic Range |
103 dB |
| Distortion |
0.01% |
| Frequency Response |
20 Hz to 12 kHz |
| Highpass Filter |
Off or 30 to 220 Hz, Step |
| System Group Delay |
10 ms |
IFB Analog or Digital Audio Input
| Connector |
TA-5M |
| Type |
Balanced |
| Level |
-10 dBu tp +4 dBu |
| Impedance |
10 k Ω |
| ADC Bit-depth |
24 bits |
| ADC Sampling Rate |
48 kHz |
Timecode I/O
| Connector |
BNC |
| Input Level Range |
1 to 5V, P-P |
| Output level |
2V P-P |
| Impedance
|
75 Ω |
Timecode Reader/Generator
| Clock Accuracy |
1.54 PPM (1 frame out in 6 hours) |
| Timecode Type |
SMPTE |
| Timecode Frame Rates |
23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF |
