The Wisycom BFL-R2 is a double RF over Fibre Module that can transport Sound Information over several kilometres without losing one dB of its original input signal using state-of-the-art laser technology. It delivers a Spurious-Free Dynamic Range (SFDR) of 116dB/Hz²/³ while enhancing the system Noise Figure (NF) to 10dB. Equipped with this piece of gear range will be no problem anymore
The BFL-R2 also offers selectable filters and an RF-Band range of 170-1260 MHz. Switching between modes is easy since the BFL-R2 has its own interface, as well as access to the Wisycom App for flexible configuration and operation.
Wisycom BFL-R2 features
- Wide RF band: 170-1260 MHz
- Easy configuration thru an high contrast OLED white display and 4 key navigation buttons
- Monitor & control through Ethernet, Bluetooth and LoRa
- Operating voltage range: 9 ÷ 18 Vdc
- 2 RGB LEDs for system status indication
- DC power for external amplifier 12V 200mA for PAW or LBP (on IFB mode)
Wisycom BFL-R2 Specifications
| Frequency ranges |
170÷1260 MHz |
| RF Connector |
BNC (N on request) |
| DC power for external amplifier |
+12Vdc, 220 mA max, compatible with Wisycom active amplifier (PAW, LBP/LNP) |
| Tunable Filter |
470 ÷ 758 MHz (UHF), 40MHz of bandwidth, 1 MHz step tuning |
| Fixed Filter |
F1 version: 820-832MHz, 733-758MHz, 940-960 MHz (for Europe, USA and UK)
F2: version: 806-810MHz, 927-935MHz, 1240-1260MHz (for Japan and Korea) |
| Selectable band pass filter |
17 RF filters selectable:
F1 version
HP LP HP LP
HP: 170 MHz LP: 608/698/1160/1260 MHz
HP:470 MHz LP: 608/698/1160/1260 MHz
HP:518 MHz LP: 608/698/1160/1260 MHz
HP:566 MHz LP: 698/1160/1260 MHz
HP:960 MHz LP: 1160/1260 MHz
F2 version
HP: 170 MHz LP: 608/698/714/1260 MHz
HP: 470 MHz LP: 608/698/714/1260 MHz
HP: 518 MHz LP: 608/698/714/1260 MHz
HP: 566 MHz LP: 698/714/1260 MHz
HP: 614 MHz LP: 698/714/1260 MHz
|
| Optical Connector |
SC/APC (LC/APC on request) for RFoF, LC/PC for Data (remote control)
|
| Input optical power |
from -6 dBm to 6 dBm [0.25 mW to 4 mW]
|
| Absolute max optical power |
10 mW
Do not exceed max input optical power!
|
| Wavelength |
1300 to 1650 nm
|
| Managing interface |
Display menu and 4 buttons, Remote Control thru Wisycom Manager or Wisycom App
|
| LEDs |
2 multicolour RGB LEDs to easy indicates BFL status (left for channel A, right for channel B):
red: RF/optical overload
blue: booster enabled
green: link active, no alarm
off: link disabled
|
| Power supply |
9 ÷ 18 Vdc
|
| Power Connector |
Hirose 4pin (pin1: GND, pin4: Vdc)
|
| Power consumption |
5,4 W typical, +1W with 2 Ethernet active, +1,5 W max for each active antenna booster (LFA)
|
| Display |
High contrast OLED white display (128 x 64 pixels)
|
| Mounting |
4 holes (for M4 screw type)
|
| Temperature range |
-10 ÷ +50 °C
|
| Dimensions |
105 mm(L) x 178 mm(H) x 42 mm(D)
|
| Weight |
800 g approx.
|
