The SX-M2D2 is all at once:
- A very high quality stereo preamplifier
- An analog-to-digital and digital-to-analog converter
- A headphone and monitoring amplifier
- A USB sound card compatible with any type of computer or smartphone
- An audio mixer with an integrated full featured compressor-limiter.
An embedded digital matrix allows any input to be routed to any output or to an internal stereo mixer. The fully digital controls allow menu access to all features with only two rotary encoders. A high-brightness graphic display shows the available options and settings as well as four modulometers assignable in pairs to any signal source. The power supply from a standard battery, recharged in the device, guarantees hours of autonomy, even if the two power sources available to the SX-M2D2 are unplugged.
Features
- Two mic/line analog inputs with 135dB dynamic range
- Independent line and phones outputs
- AES42/AES3 input, AES3 output
- Two channels in/out USB audio 2.0
- Powered by removable Li-ion battery, Hirose or USB with intelligent energy management
Specifications
Inputs/Outputs
- 2x mic/line inputs on TA3, electronically balanced, with phase reversal, 48V phantom, LF cut and level control
- 1x AES3/AES42 on TA3, transformer balanced input with phase reversal and level control
- 1x line output on TA3, 2 channels analog unbalanced
- 1x AES3 output on TA3, 2 channels transformer balanced with ASRC (48/96/192k)
- 1x USB audio 2 channels input/output on micro USB type C connector
- independent line/headphones stereo output on mini-jack
Performance
- 135 dB (A-weighted) overall dynamic range
- THD < 0.001%
- 90 kHz overall frequency response @192kHz
- 24-bit 48/96/192kHz
Powering
- external DC 9-18V on Hirose 4-pin
- external DC 5V on micro USB
- removable 18650 lithium-ion battery cell, charged with external DC input
- intelligent energy management
- About 4.5 hours run-time with a full charged 11.5Wh battery and two Schoeps 48V microphones
