This is the Shure MoveMic MV-R Camera Mountable Wireless Receiver.
Shure MoveMic is a new family of wireless microphones for the modern content creator, videographer and mobile journalist featuring single- and two-channel wireless lavalier microphones, as well as a separate receiver to give creators the flexibility to record to any device.
What's in the box?
The Shure MoveMic 2-Channel Wireless Receiver includes:
1 x MoveMic 2-channel Receiver
1 x USB-C Cable
1 x 3.5mm Cable
Shure MoveMic Features:
Size:
The Shure MoveMic has been purposely designed with one of the smallest, most discrete form factors on the market - to be almost invisible. Affix the MovemMic with the clip facing outwards for the most discrete placement on your subject.
Sound Quality
Shure’s decades of experience in producing the world’s best wireless audio have been packed into the MoveMic family of microphones for reliability and durability like you’ve never experienced before.
Direct to phone - no receiver needed!
Not only do Shure's MoveMic One and MoveMic Two offer up to two channels of high-quality audio recording; it has the power to connect directly to your phone without the need for a receiver. Simply download the Shure MOTIV Video or Audio app, connect your MoveMic One or Two within the app and you’re set. No receiver is needed when using Shure MOTIV app to connect to your phone.
24 hours of recording per charge
Every MoveMic lavalier microphone contains up to eight hours of battery life, plus an additional two eight-hour charges within the charge case, giving you at least 24 hours of recording for every full charge.
Once paired, always ready
Get ready to record in seconds by pairing your MoveMic lavalier microphones to your phone via the Shure MOTIV Video app, or to your MoveMic Receiver. After first pairing, the microphones will automatically reconnect to the last device when removed from the charging case and powered on.
IPX4 rated
You shouldn’t have to worry about your equipment. So Shure's engineers have tested MoveMic to withstand rain, spills and splashes.
MoveMic Receiver Kit for universal compatibility
Choose the Shure MoveMic Two Receiver Kit or pick up the MoveMic Receiver separately for additional compatibility with cameras, computers and third-party mobile apps. Connect to all other devices using the supplied USB-C or 3.5mm cable or pick up a USB-C-Lightning cable separately should you wish to connect your MoveMic Receiver to a Lightning-enabled iOS device.
App Control
The microphones are only half the story: download the free ShurePlus MOTIV Video or Audio app to configure audio settings such as gain, limiter, compression, noise reduction, and EQ and record/livestream your content directly from the app.
Shure MoveMic Two Kit Specifications:
| Frequency response: |
50Hz - 20KHz (+/- 1db) |
| Dynamic Range (A-Weighted): |
100dB |
| Equivalent Noise (A-Weighted, Camera Out = Line Level): |
31 dBSPL |
| Equivalent Input Noise (A-Weighted, Direct to phone): |
26 dBSPL |
| Max Sound Pressure Level (SPL): |
130dBSPL |
| Sensitivity when used with MV-LAV (Mic Gain = 0dB): |
-45dBV @94dBSPL (1 Pascal RMS) |
| Bit Depth: |
24Bit |
| Sampling Rate: |
48KHz |
| Gain Adjustment Range |
0 - 60 dB |
| Minimum Load Impedance - HP: |
16 ohms |
| Maximum Headphone Output Level: |
26.4mW @1% THD |
| Minimum Load Impedance - Camera Out |
2k ohms |
| Maximum Camera Output Level (Mic Setting): |
-26dBV |
| Maximum Camera Output Level (Line Setting): |
-8.3dBV |
| Latency to 3.5mm (without NR): |
15.33 ms (within 1 frame @60fps) |
| Latency to 3.5mm (with NR): |
17.33 ms |
| Latency to USB: |
Host Device Dependent |
| Latency Direct to phone |
A/V synced within 1 frame |
Receiver Specifications:
| Overall Dimensions (with cold shoe
mount fully extended) |
65 mm x 67 mm x 19 mm
[2.55" x 2.64" x 0.75"] |
| Weight |
81 g [2.86 oz] |
| Housing material |
Black PC/ABS Thermoplastic |
| Antenna material |
Sheet metal (tin-plated steel) |
