The K-TEK KPCK9 is a coiled cable kit made specifically for the 9′ 6-section KP9 Mighty Boompole. The Mighty 6 section boompoles have a removable headpiece therefore no soldering is required, simply drop the cable through the top section once the headpiece is removed, plug the TA3 into your bottom right angle exit module (KPCCR) and attach to the bottom of your KP9 boompole. K-Tek’s Mighty Boompole cable has thicker gauge wire and stronger shielding than previous versions.
The TA3 at the base of the cable is surrounded by a machined Delrin shell which secures the cable to the connector. Simply plug the TA3 into the male end of the KPCCR module. In extreme weather conditions it may be wise to unplug and remove the cable from inside the pole. Keeping the bottom open by removing the bottom module or adding the flow through base (KPFT) will allow water to drain through the pole instead of filling the inside of the tubes.
Key Features
-
For K-Tek KP9 9′ 6-section Mighty Boompole
-
Low-profile right-angle 3-pin top connector
-
TA3 connector at the base for KPCCR module
-
Easy drop-through installation—no soldering
-
Thicker gauge wire with RF shielding
-
Made in the USA
Compatible with: K-Tek KP9 boompole
Requires: KPCCR bottom module
Weight: 68g
