/
Description
The DPA 4017B Shotgun Microphone is designed for a broad range of applications, the 4017 Shotgun Mic is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast / ENG / film booming and even studio recording environments.
Main Features:
- Small and lightweight
- Excellent RF immunity
- Highly immune to humidity
- Uniform off-axis response
- Highly directional pattern
- Sleek shotgun for distant miking
- Integrated active cable
Light and accurate
At just 210 mm (8.3 in) and 68 g (2.4 oz), this mic is one of the shortest and lightest shotgun condenser microphones available. At the same time, it offers impressive accuracy, clarity and musicality. The mic is immune to RF emission and the 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping. It also withstands use in very humid environments with ease.
Specifications:
| Directional pattern |
Supercardioid, lobe-shaped
|
|
Principle of operation
|
Pressure gradient, with interference tube
|
|
Cartridge type
|
Pre-polarized condenser
|
|
Frequency response
|
20 Hz - 20 kHz, permanent third order high pass filter at 50 Hz
|
|
Effective frequency range, ±2 dB, at 60 cm (23.6 in)
|
70 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
|
|
Sensitivity, nominal, ±2 dB at 1 kHz
|
19 mV/Pa; -34.4 dB re. 1 V/Pa
|
|
Equivalent noise level, A-weighted
|
Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
|
|
Equivalent noise level, ITU-R BS.468-4
|
Typ. 24 dB (max. 26 dB)
|
|
Distortion, THD < 1%
|
134 dB SPL RMS, 137 dB SPL peak
|
|
Dynamic range
|
Typ. 124 dB
|
|
Max. SPL, THD 10%
|
138 dB SPL peak
|
|
Switchable attenuator, filters etc.
|
High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
|
|
Rated output impedance
|
100 Ω
|
|
Minimum load impedance
|
2 kΩ
|
|
Cable drive capability
|
100 m (328 ft)
|
|
Output balance principle
|
Signal balanced
|
|
Common mode rejection ratio (CMRR)
|
> 40 dB
|
|
Power supply (for full performance)
|
P48 (Phantom Power)
|
|
Current consumption
|
4.5 mA
|
|
Connector
|
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
|
|
Color
|
Matte black
|
|
Weight
|
68 g (2.4 oz)
|
|
Microphone diameter
|
19 mm (0.75 in)
|
|
Capsule diameter
|
19 mm (0.75 in)
|
|
Microphone length
|
212 mm (8.3 in)
|
|
Maximum output voltage, RMS
|
2.0 V
|
|
Polarity
|
+V at pin 2 for positive sound pressure
|
|
Temperature range
|
-40°C to 45°C (-40°F to 113°F)
|
|
Relative humidity (RH)
|
Up to 90%
|
