The DPA 2011 Twin Diaphragm Cardioid Mic is a directional microphone. The distinctive sound of this microphone is well balanced. It bridges the gap between the extreme sound quality of our pencil microphones and our well-known Lavalier microphones.
Two opposite-facing miniature capsules are custom rebuilt inside this microphone. They are placed into a double-diaphragm, one-capsule composition. This combines the advantages of small capsules with the lower inherent noise achieved from a larger diaphragm area. These capsules provide fast impulse response and large frequency bandwidth. The capsules are loaded to our supreme preamps, which gives the sound more air and precision.
Specifications
| Directional pattern |
Cardioid |
| Principle of operation |
Pressure gradient, with interference tube |
| Cartridge type |
Pre-polarized condenser, Twin Diaphragm Capsule |
| Frequency response |
20 Hz - 20 kHz |
| Effective frequency range, ±2 dB, at 30 cm (11.8 in) |
50 Hz - 17 kHz with 3 dB soft boost at 12 kHz |
| Sensitivity, nominal, ±2 dB at 1 kHz |
10 mV/Pa; -40 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted |
Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4 |
Typ. 33 dB (max. 36 dB) |
| Rated output impedance |
100 Ω |
| Minimum load impedance |
2 kΩ |
| Cable drive capability |
100 m (328 ft) |
| Output balance principle |
Impedance balancing |
| Common mode rejection ratio (CMRR) |
> 40 dB |
| Power supply (for full performance) |
P48 (Phantom Power) |
| Current consumption |
3.5 mA |
| Connector |
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Color |
Matte black |
| Weight |
24 g (0.8 oz) |
| Microphone diameter |
19 mm (0.75 in) |
| Microphone length |
51 mm (2.0 in) |
| Maximum output voltage, RMS |
2.2 V |
| Polarity |
+V at pin 2 for positive sound pressure |
| Temperature range |
-40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH) |
Up to 90% |
| Sensitivity selection tolerance (at 1 kHz) |
±1.5 dB |
