DPA Microphones' unique Twin Diaphragm Omni Mic Capsule is at the heart of these amazing microphones. This capsule gives the mic a distinctive, well-balanced sound and bridges the gap between the extreme sound quality of our pencil microphones and our well-known lavalier microphones.
Two opposite-facing miniature capsules are custom rebuilt inside this microphone. They are placed into a double-diaphragm, one-capsule composition. This combines the advantages of small capsules with the lower inherent noise achieved from a larger diaphragm area. These capsules provide fast impulse response and large frequency bandwidth. The capsules are loaded to our supreme preamps, which gives the sound more air and precision.
Specifications
Directional pattern |
Omnidirectional |
Principle of operation |
Pressure |
Cartridge type |
Pre-polarized condenser, Twin Diaphragm Capsule |
Frequency response |
20 Hz - 20 kHz |
Effective frequency range ±2 dB |
50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz |
Sensitivity, nominal, ±2 dB at 1 kHz |
40 mV/Pa; -28 dB re. 1 V/Pa |
Equivalent noise level, A-weighted |
Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A)) |
Equivalent noise level, ITU-R BS.468-4 |
Typ. 28 dB (max. 30 dB) |
Distortion, THD < 1% |
127 dB SPL RMS, 130 dB SPL peak |
Dynamic range |
Typ. 114 dB |
Max. SPL, THD 10% |
139 dB SPL peak |
Rated output impedance |
100 Ω |
Minimum load impedance |
2 kΩ |
Cable drive capability |
100 m (328 ft) |
Output balance principle |
Impedance balancing with Active Drive |
Common mode rejection ratio (CMRR) |
> 50 dB |
Power supply (for full performance) |
P48 (Phantom Power) |
Current consumption |
2.8 mA |
Connector |
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
Color |
Matte black |
Weight |
60 g (2.1 oz) |
Microphone diameter |
19 mm (0.75 in) |
Microphone length |
58 mm (2.3 in) |
Maximum output voltage, RMS |
4.5 V |
Polarity |
+V at pin 2 for positive sound pressure |
Temperature range |
-40°C to 45°C (-40°F to 113°F) |
Relative humidity (RH) |
Up to 90% |
Sensitivity selection tolerance (at 1 kHz) |
±1.5 dB |