The Audio-Technica AT4051b Cardioid Condenser Modular Microphone is engineered to meet the demanding acoustic needs of professional fieldrecording or close Location Sound Settings. With its high front-to-back rejection ratio cardioid polar pattern, it ensures excellent isolation of the desired sound source, while its direct-coupled, balanced output guarantees a clean signal even under high-output conditions.
Featuring transformerless circuitry, the Audio-Technica AT4051b eliminates low-frequency distortion and provides superior transient response for clear, transparent sound reproduction. Its rugged turned-brass housing ensures durability.
Audio-Technica AT4051b features
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- High front-to-back rejection ratio cardioid polar pattern improves isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards
Audio-Technica AT4051b Specifications
Polar Pattern |
Cardioid |
Frequency Response |
20 - 20.000 Hz |
Low Frequency Roll Off |
80 Hz, 18 dB/octave |
Open Circuit Sensitivity |
-34 dB (19.9 mV) re 1V at 1 Pa |
Maximum Input Sound Level |
145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) |
Dynamic Range |
129 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio |
78 dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
48V DC, 4.8 mA typical |
Switches |
Flat, roll-off; 10 dB pad (nominal) |
Weight |
126g |
Dimensions |
155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter |
Output Connector |
Integral 3-pin XLRM-type |
Accessories Included |
AT8405a stand clamp for 5/8"-27 threaded stands windscreen protective carrying case |